2/3/4/5/6 in 1 PH Tester Soil Water Moisture Light Test Meter Temp Humidity Test

Description

Store Categories
Store Categories
Other
2/3/4/5/6 in 1 PH Tester Soil Water Moisture Light Test Meter Temp Humidity Test
Details
2 in 1 Soil Tester
Features
1. Environmentally friendly ABS material, fall and wear resistant.
2. Widely used: for outdoor and indoor plants, gardens and lawns.
3. Simple operation: easy to use, just plug in and read. No batteries, easy and convenient to use.
4. 2-in-1 function: test the soil pH of plants, quickly help you focus on mastering when you need to water and control the pH level in the soil.
5. Accurate and reliable: Advanced dual needle detection technology greatly improves the speed and accuracy of detecting and analyzing soil pH acidity.
Specification
Measuring range: PH: 0~9
Probe length: 8.6cm
Product size: 176*62mm
Material: plastic
Instructions for use
How to analyze soil fertility
1. First remove topsoil about 5 cm; then mash the soil down to 13 cm deep. And clean the soil of all organic impurities that will affect the test results, such as leaves, roots, etc.
2. Soak the soil with water to a muddy consistency. ( It is better to use rainwater or distilled water).
3. Wipe the probe with a clean cotton or paper towel.
4. Dial the function key to the first gear from the left, on.
5. Insert the probe rod into the measured soil until the distance between the soil and the body is no more than 2.5 cm. Wait for 10 seconds at most and wait for the pointer to stabilize before reading the data.
6. Record the data. Take the probe out of the soil and clean the probe thoroughly. The analysis results are judged by the following criteria
Lack of (TOO LITTLE)
Nitrogen less than 50 ppm
Phosphorus less than 4 ppm
Potassium less than 50 ppm
Ideal range (IDEAL)
50-200 ppm
4-14 ppm
50-200 ppm
Excess (TOO MUCH)
Greater than 200 ppm
Greater than 14 ppm
Greater than 200 ppm
Unit ppm: parts per million
If the analysis result shows "TOO MUCH" which means: too much
1. Water heavily to dilute the excess nutrients.
2. For potted plants, repot them into new soil.
3. Do not apply any more fertilizers, but add manure, compost, plant residues, leaves and other organic materials to the soil.
How to analyze the pH value of the soil
1. First remove the topsoil of the measured soil about 5 cm; then mash the soil down to a depth of 13 cm. And clean the soil of all organic impurities that will affect the test results, such as leaves, roots, etc.
2. Soak the soil with water to a muddy consistency. (It is better to use rainwater or distilled water)
3. Dial the function key to the rightmost gear, on.
4. Wet the probe rods. Use a clean cotton pad to put the rightmost of the three probes - . Root wipe clean.
5. Insert the probe completely into the soil under test.
6. Wait 1 minute for the data to be read.
7. After the test, wipe the probe clean and dry it.
Special Tips
Please do not insert the probe rod into the soil for a long time, and do not use this device to test the liquid to avoid damage to it.
List
1 x detector
3 in 1 Soil Tester
Specification:
Brand new and high quality
3 in 1 Soil Analysis Tester Gardening Detector Hygrometer & Acidity PH Meter & Light Detector
1) It’s a useful tool for gardening
2) Used to measure soil PH, humidity and light
3) “MOIST” key is correspondent to MOIST on the table. 1-3 (red part) indicate watering needed,
4-7 (green part) indicate water suitable, 8-10 (blue part) indicate too wet. Please adjust watering time according to plant species.
4) “PH” key is correspondent to PH 8-3.5 on the table. 7 indicate neutral, the lower the value is, the higher the acidity is.
Please adjust soil acidity according to plant species.
5) “LIGHT” key is 0-2000 lumen. The higher the value is, the stronger the light is. Please determine
the need for shade according to plant species.
6) Note: prohibit to probe into water directly; Not insert in the soil for a long time to use.
7) Size: 290*50*38mm
8) Probe length: 200mm
9) Weight: 90g
The tool plant owners, gardeners can't live without!
3 IN 1 moisture light & PH meter Soil analyzer meter.
For outdoor & indoor plants, gardens & grass lawn.
Take the guess work out of your daily garden watering light and moisture.
Save water, energy and keep your plants, lawn, flower in top condition.
Measures moisture at root level.
Prevents over and under watering
Scientifically accurate.
Easy to use, just insert and read.
No battery required, simple and convenient to use
Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.
To avoid damaging the electrode, please clean the electrode after each use
Package Included:
1PCS*Soil Analysis Tester Detector Alkalinity Acidity Moisture Sunlight PH hygrometer
3 in 1 Soil Tester #
Product Description:
Functions: Measure soil MOISTURE, PH and LIGHT levels
Easy To Use( No Battery needed, Plug and read):
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
Specifications:
pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Color: Green
Warm Tips:
1. To avoid damaging the probe, do not use in soil meter with stones and insert forcibly
2. Please wipe and clean the probe after each time using.
3. Don't leave the meter in the soil for a long time.
4. Designed for testing soil, don't use it to test pure water or other liquids.
5. The indicator will not move If the soil is too dry, please water the plant first and test again later.
6. Design for testing soil ONLY.
We're so proud of you because you are proud of your plants!
Plesse feel free to contact us if you have any question or you find what you get is defect.
Package Included:
1 x 3 in 1 Soil Tester
4 in 1 Soil Tester #
100% Brand new and high quality
Electronic digital display four unity soil analyzer is the latest device speed test, mainly test the soil ph value, moisture humidity, temperature and plant light intensity, the use of a carbon 9 v batteries, the operation is simple probe length is 200 mm. The instrument by measuring the parameters of the liquid crystal display (LCD). The instrument also has low power indicator and auto power off function. It saves time and energy, high efficiency. This instrument is suitable for the flowers and grass planting, landscaping
1.measure the current environment of light intensity
LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH +
2.measuring soil water content
DRY+,DRY,NOR,WET,WET+
3.measuring the temperature of the soil, temperature measuring range: - 9 ~ + 50 ℃ (16 ~ 122 ℉), (precision: 1 ℃ / 1 ℉)
4.measure the soil PH value, PH measurement range: 3.5 to 9.0
Working temperature: + 5 ℃ ~ + 40 ℃
Size:As pictures show you
Large screen LCD user interface
LED backlight auxiliary lighting, easy reading
Metric system transformation temperature
Battery is low prompt functions
Can save electricity automatic shutdown function, without any operation, 5 minutes automatic shutdown
Simple operation, easy to carry
Power supply: 9V  battery(The item is without the battery )
Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item.. Thank you!
4/5 in 1 Soil Tester
Features:
1. Multifunctional soil measuring instrument for testing soil pH, soil moisture, soil temperature (℃/④) and sunshine intensity.
2. Digital LCD screen, green backlight, large black font, intuitive and clear display of the value.
3. High-sensitivity aluminum probe ensures measurement accuracy.
4. Easy to operate, light weight and easy to carry.
5. Pay attention to the bottom condition, suitable for indoor, outdoor, garden, lawn and farm use.
Specifications:
Material: ABS aluminum alloy
Soil temperature measurement range: -9 to 50°C (16 to 122°C)
Accuracy: 1℃/1⋅
Working temperature: 5-40℃
pH measurement range: 3.5 to 9.0
Power supply: 4*1.5V AAA battery (not included)
Sample Length: 205mm to 8.07in
Product size: 317*57mm12.482.24in
Package Weight: 153g to 5.40oz
Packing size: 32*6.5*4.5 cm to 12.60*2.56 to 1.77 inches
Models:
4-in-1 soil tester (lighting/soil temperature/soil moisture/soil pH)
5-in-1 soil tester (lighting/soil temperature/soil moisture/soil pH/ambient humidity)
Usage and Precautions:
1. The main part of the product should not be immersed in soil or water, main part of water or rainwater.
2. The probe can only be used to detect soft soil and wet soil, the use of dry soil and hard soil will cause bending deformation or probe.
3. When the probe is in the s-oil, the electrode does not touch the first one, do not use too much force to damage the probe and measure the pH
Notice:
When testing, the soil must be soaked with water, and the probe must be used up in the soil as much as possible.
Note: If the soil is too dry, please wet the soil first, hard insertion will damage the electrode tip
Packing list:
1* Soil Tester
1*English manual
Note:
1. Due to the difference in light and screen settings, the color of the item may be slightly different from the picture.
2. Due to different manual measurements, please allow slight differences in size.
6 in 1 Soil Tester
Characteristics:
1. Accurately grasp the soil fertility status: 3 seconds to read the test results, the data is accurate for a variety of soils, comprehensive care
2.Soil fertility determines the nutrition for plant survival, creating a quality environment for your soil.
3.Dual temperature ℃/℉ unit switching: soil temperature can be detected at any time.
4. Highly sensitive probe: fast detection and reading of soil information.
5. Backlit screen display: HD backlit screen design, clear readings and multiple parameters are displayed at the same time, suitable for all kinds of soil testing.
Parameters:
Product model: six-in-one soil tester
Measuring range: illumination / humidity / pH / temperature, etc.
Product color: black
Use: inserted into the soil
Scope of use: courtyard garden, greenhouse planting, etc.
Battery: 2*AAA
(shipped without battery)
Package Includes:
Tester*1
Instruction manual*1
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Returns Policy
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2017 DataCaciques
Home
Payment
Return Policy
About us
Contact us
2/3/4/5/6 in 1 PH Tester Soil Water Moisture Light Test Meter Temp Humidity Test
Details
2 in 1 Soil Tester
Features
1. Environmentally friendly ABS material, fall and wear resistant.
2. Widely used: for outdoor and indoor plants, gardens and lawns.
3. Simple operation: easy to use, just plug in and read. No batteries, easy and convenient to use.
4. 2-in-1 function: test the soil pH of plants, quickly help you focus on mastering when you need to water and control the pH level in the soil.
5. Accurate and reliable: Advanced dual needle detection technology greatly improves the speed and accuracy of detecting and analyzing soil pH acidity.
Specification
Measuring range: PH: 0~9
Probe length: 8.6cm
Product size: 176*62mm
Material: plastic
Instructions for use
How to analyze soil fertility
1. First remove topsoil about 5 cm; then mash the soil down to 13 cm deep. And clean the soil of all organic impurities that will affect the test results, such as leaves, roots, etc.
2. Soak the soil with water to a muddy consistency. ( It is better to use rainwater or distilled water).
3. Wipe the probe with a clean cotton or paper towel.
4. Dial the function key to the first gear from the left, on.
5. Insert the probe rod into the measured soil until the distance between the soil and the body is no more than 2.5 cm. Wait for 10 seconds at most and wait for the pointer to stabilize before reading the data.
6. Record the data. Take the probe out of the soil and clean the probe thoroughly. The analysis results are judged by the following criteria
Lack of (TOO LITTLE)
Nitrogen less than 50 ppm
Phosphorus less than 4 ppm
Potassium less than 50 ppm
Ideal range (IDEAL)
50-200 ppm
4-14 ppm
50-200 ppm
Excess (TOO MUCH)
Greater than 200 ppm
Greater than 14 ppm
Greater than 200 ppm
Unit ppm: parts per million
If the analysis result shows "TOO MUCH" which means: too much
1. Water heavily to dilute the excess nutrients.
2. For potted plants, repot them into new soil.
3. Do not apply any more fertilizers, but add manure, compost, plant residues, leaves and other organic materials to the soil.
How to analyze the pH value of the soil
1. First remove the topsoil of the measured soil about 5 cm; then mash the soil down to a depth of 13 cm. And clean the soil of all organic impurities that will affect the test results, such as leaves, roots, etc.
2. Soak the soil with water to a muddy consistency. (It is better to use rainwater or distilled water)
3. Dial the function key to the rightmost gear, on.
4. Wet the probe rods. Use a clean cotton pad to put the rightmost of the three probes - . Root wipe clean.
5. Insert the probe completely into the soil under test.
6. Wait 1 minute for the data to be read.
7. After the test, wipe the probe clean and dry it.
Special Tips
Please do not insert the probe rod into the soil for a long time, and do not use this device to test the liquid to avoid damage to it.
List
1 x detector
3 in 1 Soil Tester
Specification:
Brand new and high quality
3 in 1 Soil Analysis Tester Gardening Detector Hygrometer & Acidity PH Meter & Light Detector
1) It’s a useful tool for gardening
2) Used to measure soil PH, humidity and light
3) “MOIST” key is correspondent to MOIST on the table. 1-3 (red part) indicate watering needed,
4-7 (green part) indicate water suitable, 8-10 (blue part) indicate too wet. Please adjust watering time according to plant species.
4) “PH” key is correspondent to PH 8-3.5 on the table. 7 indicate neutral, the lower the value is, the higher the acidity is.
Please adjust soil acidity according to plant species.
5) “LIGHT” key is 0-2000 lumen. The higher the value is, the stronger the light is. Please determine
the need for shade according to plant species.
6) Note: prohibit to probe into water directly; Not insert in the soil for a long time to use.
7) Size: 290*50*38mm
8) Probe length: 200mm
9) Weight: 90g
The tool plant owners, gardeners can't live without!
3 IN 1 moisture light & PH meter Soil analyzer meter.
For outdoor & indoor plants, gardens & grass lawn.
Take the guess work out of your daily garden watering light and moisture.
Save water, energy and keep your plants, lawn, flower in top condition.
Measures moisture at root level.
Prevents over and under watering
Scientifically accurate.
Easy to use, just insert and read.
No battery required, simple and convenient to use
Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.
To avoid damaging the electrode, please clean the electrode after each use
Package Included:
1PCS*Soil Analysis Tester Detector Alkalinity Acidity Moisture Sunlight PH hygrometer
3 in 1 Soil Tester #
Product Description:
Functions: Measure soil MOISTURE, PH and LIGHT levels
Easy To Use( No Battery needed, Plug and read):
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
Specifications:
pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Color: Green
Warm Tips:
1. To avoid damaging the probe, do not use in soil meter with stones and insert forcibly
2. Please wipe and clean the probe after each time using.
3. Don't leave the meter in the soil for a long time.
4. Designed for testing soil, don't use it to test pure water or other liquids.
5. The indicator will not move If the soil is too dry, please water the plant first and test again later.
6. Design for testing soil ONLY.
We're so proud of you because you are proud of your plants!
Plesse feel free to contact us if you have any question or you find what you get is defect.
Package Included:
1 x 3 in 1 Soil Tester
4 in 1 Soil Tester #
100% Brand new and high quality
Electronic digital display four unity soil analyzer is the latest device speed test, mainly test the soil ph value, moisture humidity, temperature and plant light intensity, the use of a carbon 9 v batteries, the operation is simple probe length is 200 mm. The instrument by measuring the parameters of the liquid crystal display (LCD). The instrument also has low power indicator and auto power off function. It saves time and energy, high efficiency. This instrument is suitable for the flowers and grass planting, landscaping
1.measure the current environment of light intensity
LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH +
2.measuring soil water content
DRY+,DRY,NOR,WET,WET+
3.measuring the temperature of the soil, temperature measuring range: - 9 ~ + 50 ℃ (16 ~ 122 ℉), (precision: 1 ℃ / 1 ℉)
4.measure the soil PH value, PH measurement range: 3.5 to 9.0
Working temperature: + 5 ℃ ~ + 40 ℃
Size:As pictures show you
Large screen LCD user interface
LED backlight auxiliary lighting, easy reading
Metric system transformation temperature
Battery is low prompt functions
Can save electricity automatic shutdown function, without any operation, 5 minutes automatic shutdown
Simple operation, easy to carry
Power supply: 9V  battery(The item is without the battery )
Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item.. Thank you!
4/5 in 1 Soil Tester
Features:
1. Multifunctional soil measuring instrument for testing soil pH, soil moisture, soil temperature (℃/④) and sunshine intensity.
2. Digital LCD screen, green backlight, large black font, intuitive and clear display of the value.
3. High-sensitivity aluminum probe ensures measurement accuracy.
4. Easy to operate, light weight and easy to carry.
5. Pay attention to the bottom condition, suitable for indoor, outdoor, garden, lawn and farm use.
Specifications:
Material: ABS aluminum alloy
Soil temperature measurement range: -9 to 50°C (16 to 122°C)
Accuracy: 1℃/1⋅
Working temperature: 5-40℃
pH measurement range: 3.5 to 9.0
Power supply: 4*1.5V AAA battery (not included)
Sample Length: 205mm to 8.07in
Product size: 317*57mm12.482.24in
Package Weight: 153g to 5.40oz
Packing size: 32*6.5*4.5 cm to 12.60*2.56 to 1.77 inches
Models:
4-in-1 soil tester (lighting/soil temperature/soil moisture/soil pH)
5-in-1 soil tester (lighting/soil temperature/soil moisture/soil pH/ambient humidity)
Usage and Precautions:
1. The main part of the product should not be immersed in soil or water, main part of water or rainwater.
2. The probe can only be used to detect soft soil and wet soil, the use of dry soil and hard soil will cause bending deformation or probe.
3. When the probe is in the s-oil, the electrode does not touch the first one, do not use too much force to damage the probe and measure the pH
Notice:
When testing, the soil must be soaked with water, and the probe must be used up in the soil as much as possible.
Note: If the soil is too dry, please wet the soil first, hard insertion will damage the electrode tip
Packing list:
1* Soil Tester
1*English manual
Note:
1. Due to the difference in light and screen settings, the color of the item may be slightly different from the picture.
2. Due to different manual measurements, please allow slight differences in size.
6 in 1 Soil Tester
Characteristics:
1. Accurately grasp the soil fertility status: 3 seconds to read the test results, the data is accurate for a variety of soils, comprehensive care
2.Soil fertility determines the nutrition for plant survival, creating a quality environment for your soil.
3.Dual temperature ℃/℉ unit switching: soil temperature can be detected at any time.
4. Highly sensitive probe: fast detection and reading of soil information.
5. Backlit screen display: HD backlit screen design, clear readings and multiple parameters are displayed at the same time, suitable for all kinds of soil testing.
Parameters:
Product model: six-in-one soil tester
Measuring range: illumination / humidity / pH / temperature, etc.
Product color: black
Use: inserted into the soil
Scope of use: courtyard garden, greenhouse planting, etc.
Battery: 2*AAA
(shipped without battery)
Package Includes:
Tester*1
Instruction manual*1
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to
wait 30 days
,
Please take care it.Less than 30 days,we can't take a refund
.
Payment Method
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers
are responsible
for import duties,custom fees and taxes, if any, please check your country.
Returns Policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.