Harris RF-382A-15 Fast Tune Automatic HF Antenna Coupler

Description

Harris RF-382A-15 Fast Tune Automatic HF Antenna Coupler
Coupler looks to be in Good Physical Condition.
The Antenna output  threaded portion is Broken off at the Nut
Should extend further out. Please make Note of this defect
That is why I am selling for Parts or repair
I have Not tested this Unit.
I have Taken the Cover off and Shown Pictures Of inside the Unit
All Parts are there.
Questions Please Email Us
The RF-382A Series couplers efficiently and automatically match the output of 125 to 400 watt transceivers to a wide variety of whip, dipole, and long-wire antennas over the frequency range of 1.6 to 30 MHz. Tuning time from memory is less than 200 milliseconds. RF-382A Series couplers operate with ALE communications systems that require very fast frequency change. Rugged and reliable, they operate under the most severe environmental conditions in vehicular, transportable, shipboard, and fixedstation applications. The RF-382A Antenna Coupler is designed for direct interface with FALCON® II HF systems and is fully compatible with the built-in MIL-STD-188-141B and STANAG-4538 Automatic Link Establishment (ALE) protocols. The coupler requires a control cable and RF coax interface to connect to the associated transceiver. Separation can be up to 250 feet (76 m). A high voltage ceramic insulator provides the connection to the antenna. It is also equipped with a 50-ohm Nconnector antenna port for coaxial connection to a fixed site broadband or resonant antenna. Internal built-in test to the module level provides rapid diagnostic troubleshooting and repair. In addition, all key operating parameters are continually monitored during operation. If parameters are exceeded, a coupler fault is reported to the radio
Track Page Views With
Auctiva's FREE Counter