-40%
HF wideband Antenna Multiplexer for monoband Receivers- FedEx Fast Ship SV1AFN
$ 58.07
- Description
- Size Guide
Description
<div style="text-align:center"><img src="http://ti2.auctiva.com/sw/java.gif" border="0"><br><table align="center"><tbody><tr><td><a style="text-decoration:none" href="http://store.auctiva.com/gr_makis"><img src="http://ti2.auctiva.com/sw/images.gif" border="0"></a></td><td height="27px" valign="middle" align="center"><font face="arial" size="2"><b><a href="http://store.auctiva.com/gr_makis">gr_makis</a> Store</b></font></td></tr></tbody></table></div>ATTENTION:
The price shown
includes Greek VAT 24%
and is applicable to
all individuals in EU countries only
.
If you are from any other country including USA, Canada, Australia etc. please use the "make offer" button and divide the price by 1,24.
We will first accept this offer to let you proceed with the check-out and payment.
If you are a business registered in EU with a valid VAT number again, you can use the same button so to pay without VAT. We will send you a zero VAT tax invoice.
You can download its schematic and building instructions here
https://www.sv1afn.com/hf-antenna-multiplexer.html
(copy and paste to your browser)
1 to 3-ports (triplexer)
Share one wideband HF antenna with 3 receivers on three dedicated frequency bands
Add an additional unit for 3 receivers more and an additional for another 3.
Works in reverse too
Bonus pre-selection band-pass filtering in every branch
The SV1AFN's HF antenna multiplexer, is a bidirectional device with every port working as an input or an output and has 3 branches, each tuned on a center frequency chosen from 1.8 - 30 MHZ. All ports are of 50 Ohms nominal impedance. The 3 filters on the triplexer branches, offer high isolation between the branches and make them insensitive to arbitrary terminations.
Although the multiplexer works in reverse too, lets describe its operation as a wideband HF antenna receiving triplexer.
A multi-band or a wide-band HF antenna connects to the input SMA connector. There is a DC path, a discharging resistor connected to ground, a Gas-Plasma Discharge Tube for statics and overvoltage protection and a parallel SMA connector, used only for expansion with a second similar unit. If not used, it should left open, without any termination.
Then, up to three series tuned filters can be placed to form a diplexer or a triplexer and each branch is isolated more by using band-pass filters. For example, if there is an antenna working from 1.8 MHZ to 30 MHZ, it can be connected to the input, and then 3 separate receivers can be connected on each branch. Each receiver can only work on the designated frequency range simultanuously with the other 2 receivers, each receiver on his own frequency range, without using a splitter or a multicoupler which either would add losses and noise or introduce IMD by using an LNA to overcome its losses.
The arrangement as described above, can be duplicated, for up to 6 receivers, by using 2 triplexers and connecting their inputs in parallel with the antenna. Again, all ports will have 50 Ohms impedance without mismatches, additional losses or reflections.
The idea works in reverse, too! Think of every receiver to become a transceiver. Then, by using one multiband antenna, up to 6 transceivers can be simultaneously operated, each one either receiving or transmitting, or tuning their Antenna Tuner Units etc., without interfering each other! Of course I am talking about a different project, with much larger inductors and capacitors which can tolerate the currents and voltages of the higher power. But the idea is exactly the same and even this unit can be used for low power levels (up to +10 dBm).
Another idea for reverse operation, is to use one unit to pre-select the 3-bands and then use a second to feed one receiver with only those three bands pre-selected, without switches to select each band.
This project is only offered built and tested on order, because it needs tuning and optimisation. Just add a note when ordering with the wanted frequency bands.
ORDERS For a complete Built & Tested Triplexer
The unit includes a high-quality built & tested ENIG FR4 PCB (106 x 49 mm) that comes with female SMA connectors soldered in place together with a black aluminum box with all mounting hardware. We will email you asking about the three HF frequency ranges you need it prepared.
The shipping is with registered mail (your signature is required upon delivery) or with FedEx as you choose while checking-out.
I usually ship the next day and it takes about a week to 10 days for USA or Australia, less than a week for Europe.
Check out my
other items
! I always combine shipping.
If any questions please email me.