Icom IC-7100 Amp Relay Cable W/ ALC & Relay Buffer

Description

Icom Amplifier relay cable WIT
H ALC control line
that works with the IC-7100. 706 (all versions), 703, 718 and 78. This cable will also work with the new IC-7410 and IC-9100,
706 (all versions), 703, 718 and 78.
P
rovides TOTAL isolation between your radio and amplifier high voltage keying circuit. There is an actual miniature relay inside that will switch up to 200V @ 1.5A. The cable measures
6' long, has 100% shielding and terminates into a standard male RCA plug as does the ALC line.
BUYERS please be advised that there are other sellers making Icom relay cables but their cables offer no internal relay for isolation between your rig and amplifier. If you try to directly key an older amplifier without a relay buffer you WILL burn up your rigs keying circuit. ALL of my ICOM cables contain a small DIP relay inside the DIN plug that will key either AC or DC voltages up to 2 amps at 200V.
Folks, please be advised that we only ship twice a week, Tuesdays and Fridays. Just can't afford the gas to run to the post office every day!
A word about ALC:
ALC (Automatic Level Control) is basically a throwback to the TUBE rig days when folks were unable to reduce the drive level to amplifiers. With today's modern day rig's ALC is rarely, if ever needed UNLESS your rigs maximum output exceeds your amplifiers drive limits. And even then most all rigs these days have an RF level adjust so you can cut back on the drive. ALC is likely to cause you more frustration than good. All of my amp cables are available without ALC if you look in my store.
BUYERS BEWARE: Another seller has STOLEN and altered some of my original amp relay cable images & is using them as his own. You can tell they are altered as they are pixelated where he has cut and pasted different sections of them. He is a photo thief & phony and you will not get what he has pictured.
Folks, please be advised that we ship on Tuesdays and Fridays with a cutoff time of 12 noon.