Kenpro KR400 Antenna Rotator with 3.2” LCD touch screen Controller

Description

_______________________________________________________
Kenpro KR400 Antenna Rotator with 3.2” LCD touch screen Controller.
______________________________________________________
Controller for Antenna Rotator
using STM32 Module with 3.2” LCD touch screen
with programmable angle (auto mode). New  software 1.1
The innovative STM 32 module with touch screen is used to modify the Antenna Rotator Controller (eg KR400). The STM controller can be used to control azimuth angle in manual or auto mode. The Controller allows you to set azimuth, which you set with the rotary encoder and will stop moving the antenna once the desired angle is reached.
The STM module provides a few lines (ports) which can be used to control the Antenna Rotator “LEFT” or “RIGHT (CCW or CW).
The current angle-azimuth (Angle [deg]) is read by reading the voltage from potentiometer, which is built inside the Antenna rotator.
“Auto Angle” is set by the rotary encoder (0-360 deg).  In AUTO mode, the rotator will change position to Auto Angle and, after the new position is set, the mode will automatically switch to “MANUAL.”
In MANUAL mode, you can set required angle (azimuth) by touching buttons “LEFT” or “RIGHT.”
The STM 32 controller was built into the Rotator controller and tested on Yaesu Antenna Rotator KR400.
How the STM 32 Controller is connected with the Antenna Rotator is described in the comprehensive manual, which is included in the package. The manual includes a schematic for the STM 32 controller built into the KR400. The Controller can be adapted to any rotator.
The STM Controller will stop the Rotator motor just before the Rotator reaches the end (180 degrees).   New rotators have an end switch and the above settings are not critical but exist if you have a KR400 with no end switches.
NOTE: The Controller and  Rotator KR-400  are included in this package.
- need  AC 240V
- has end-switches (like  KR-600 )
Feel free to contact me with any questions.
Postage to US US0, to Europe US0, to Australia  US
Postage fee is estimated as it differs, depending on location.
After you place your bid please ask for an invoice or after you paid the total price you will get back adjusted postage refund, if applicable.
for Australia - price is US 750 + postage call