MFJ-1700B Six by Six Position Antenna 2000W HF-UHF Coax Switch

Description

MFJ-1700B
2X6 (dual Six by Six) ANTENNA SWITCH
2000WPEP, 1000W CW
From the manual:
The MFJ-1700B is a heavy
duty switch which allows you to connect any one of 6 transceivers in any combination.
The MFJ-1700B TRANSMITTER-ANTENNA SWITCH handles up to 2 KW PEP for 50-75 ohm loads.
All unused inputs and outputs are shorted to ground.
To use, simply connect the transmitter(s) you want to use to lettered coax connector(s) on the bottom of
the unit. Connect the antenna(s) you want to use to the numbered coax connector(s) on the top of the unit.
Connect an antenna tuner, SWR/Wattmeter, e.t.c., to the ANT COM and XMIT COM connectors on the
top and bottom of the unit. Select with the switches, on the front panel of the front panel of the MFJ-
1700B, the desired transmitter and antennas.
If using only one antenna in combination with more than one transmitter, or one transmitter in
combination with more than one antenna, the MFJ-1700B can be used to tie them together by using one
side of the coax connectors in the following sequence:
Transmitter COM ties to A-F
Antenna COM ties to 1-6
Also following these connections, the MFJ-1700B can be used as two independent switches.
9Lx3Hx1.5D
Has twelve SO-239 (UHF female, six per switch) Connectors for rigs or antennas, and two common connectors.
Guaranteed working in very good condition.
Buyer to pay shipping.  Checks must clear before shipping. Payment is expected within 4 days, or the second highest bidder may be given the chance to purchase.
CLICK HERE
for full information on shipping terms.
Powered by SixBit's eCommerce Solution