MFJ Versa Tuner V Antenna Tuner 3kW Ham Radio MFJ-989D SERVICED & TESTED 100%

Description

MFJ-989D Antenna Tuner
This unit has been professionally tested and service for sale
Original owner had removed the internal dummy load and installed an additional antenna port to use a larger external dummy load.
This unit has been cleaned and inspected and restored to its oem original condition- the internal factory dummy load part was purchased directly from MFJ and re-installed.
The extra antenna connection was left in case you want to use it for an external dummy load again but as pictured it is unhooked at the moment
The unit was cleaned up and fully tested against another bench mark tuner and reads accurately
face is in excellent cosmetic condition and case just has a few scratches as expected
Included is a 12v power supply to run the lamp meter
included is a printed copy of the manufacturers instructions
Thanks very much for looking and enjoy the hobby!
EC6
from the mfg:
Additional Information
Lowest Band of Operation
Highest Band of Operation
160 meters
-
-
10 meters
40 meters
-
60 meters
-
80 meters
-
MFJ 989D Versa Tuner V Roller Inductor Tuners handle the US amateur legal limit of 1500 watts, CW and SSB.
MFJ 989D tuners are designed to match 50 ohm output amplifiers, transmitters or transceivers to virtually any antenna. Peak and average forward power, refelected power and SWR are displayed on the illuminated cross needle meter. Illumination is provided via a 9-Volt battery or 12 Vdc or 120 Vac with an optional AC adapter.
MFJ 989D legal limit tuners use a roller inductor "T" matching network that continuously tunes all frequencies from 1.8 through 30 MHz. They will match dipoles, inverted-Vs, verticals, beams, random wires and many other antennas. MFJ 989D tuners have rear panel connectors for coaxial and single or two wire feedlines. The built-in balun will work with balanced open wire, twin-lead or twin-axial feedlines. An internal six-position antenna selector switch selects a built-in 300 watt, 50-ohm dummy load, two coaxial line outputs or a single wire line-balanced output. The coaxial line outputs are selectable, tuned or direct, with the tuner's matching network in line or with the matching network bypassed, respectively.
If you have an amplifier, then your tuner must handle the power and match the line. Tune your antenna systems with MFJ 989D Versa Tuner V Roller Inductor Tuners from DX Engineering!