MS-S3 REMOTE ANTENNA COAXIAL SWITCH , 3 POSITIONS, 2 KW PEP, Ready for use set

Description

MS-S3 REMOTE ANTENNA COAXSIAL SWITCH , 3 POSITIONS, 2 KW PEP
The MS-S3 consists of two units, the weatherproof switching box that mounts on your tower or mast
and the control unit thats placed at your operating station.
The MS-S3 provides ease in switching antennas without disconnecting a connector. This 3-position
antenna switch can be used for 46 to 75 ohm systems, plus handle 2000 watts SSB, 1500 watts CW.
(Tested for extended periods with ACOM1500-power amplifer)
All unused terminals are automatically grounded for static/lightning/RF protection.
High power provide special relays with powerful changeover contacts (max current
2x16
A). The breakdown
voltage between contact 1 kV.
When power off all antenna outputs are also earthed.
Cast aluminum housing ensures a high degree of shielding and protection from interference.
For independent control switching antennas is use remotes manual control .
Technical characteristics:
Frequency range:
1-60 MHz
Maximum power:
2000 Watt CW / VSWR<1.5:1
1800 Watts CW / VSWR<2:1
1500 Watt CW / CWS<3:1
SWR:
<1:1,20
at a frequency of 1.8 MHz to 60MHz.
SWR was measured between the input and one of connected to it six antenna outputs loaded to the impedance of 50 Ohms.
Max. SWR load:  3:1
Attenuation: < 0.05 dB at 30 MHz
The voltage supply relay: 10-15 V
Current consumption: at less than 300 mA
Temperature range: -35 ... +60 gr
• Reliable Connectors: Teflon UHF-style SO-239 females,silver plated contacts.
• Control Line: Uses any 8 conductor UTP cable.
• Easy-To-Read Antenna Indicators 3 wide-spaced LEDs indicate the selected antenna.
SHIPPING: AIRMAIL not insured post service with recommendation
and priority
, parcel released upon signature, with tracking number. Usually needs 2 weeks to arrive to you,
sometimes faster (1 week), sometimes slower (3-5 weeks)