NanoVNA-F VNA HF VHF UHF Vector Network Antenna Analyzer + 4.3 LCD + Metal Case

Description

Welcome to my shop
Product Overview
NanoVNA VNA HF VHF UHF Vector Network Antenna Analyzer + 4.3 LCD + Metal Case
Detail
Description:
New
laser typing case
is arriving, new
1.5GHz
measurement frequency on sale~~~
Click here for more details
support measurable frequency to 1.5 GHz, default setting 1 GHz, accurate measurement up to 1.35GHz.
New version of PCB
for more
reliable
measurements.
Added reactance trace, testing with
RF Demo Kit
CQ CQ CQ, This is
BH5HNU,
Brave Hotel Five Hotel Novemter Uniform,
the original author of NanoVNA-F
.
NanoVNA-F "Handheld Vector Network Analyzer"
is
a product based on the Open Source Project of NanoVNA
(
https://ttrf.tk/kit/nanovna/
)
.
Thanks to hugen's creative idea of use the harmonic of Si5351
, We build NanoVNA-F and expand the measure frequency up to 1GHz, which S11 still have 40dB dynamic range At 1GHz.
Your can
ask any questions about NanoVNA-F
at:
https://groups.io/g/nanovna-f
Or watch the Video:
https://youtu.be/LwgF8JfZZaQ
NanoVNA-F hardware features include and are not limited to the following improvements:
1.
Use 4.3-inch IPS TFT LCD &
resistive touch screen
, with a larger view angle and can be seen clearly in strong outdoor light.
2. Switch to large capacity
5000mAh/3.7V lithium battery
(The battery is an optional accessory, some
International express
cannot transport the battery, we also provide a battery holder, you can use the common mobile phone battery as an alternative, which size limit < L(90mm)*W(54mm)*H(5.6mm)),
standby time is longer, and expand a USB interface. Usually, it can be used as a power bank when the instrument is not used.
3. The Lipo Charing IC to changed to IP5306(with 2A
high charing current)
, make the charging time shorter.
4. Use a larger and better operating level.
5. Use a larger and better operating Power Switch.
6. Support Chinese and English menu switching;
7. Upgrade the user program by virtual U disk（16MB SPI Flash Memory Inside）.
8. Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
9. Firmware are fully open source at
github.com/flyoob/NanoVNA-F
please star me ~~~
...
NanoVNA-F hardware block diagram:
The NanoVNA-F measurement range is 50k-1GHz. Use the harmonic of the clock chip SI5351 the
measure
frequency up to 1000MHz. At 600M-1GHz, the S11 has a dynamic range of 40dB (the standing wave ratio is less than 1.02). The RF front end is designed with a metal shield that allows the S21 to have a dynamic range better than 60dB over the full frequency range.
Basic performance:
● Size: 14CM * 7.5CM * 2CM (length, width and height)
● Measurement frequency: 50kHz ~ 1000MHz
● RF output: -13dbm (maximum -9dbm)
● Frequency accuracy: < 0.5ppm
● Port SWR: < 1.1
●
Display: 4.3 inch IPS TFT (800x480)
● USB interface: USB Type-C communication mode: CDC (serial)
● Power consumption: USB 5V 200mA, built-in 5000mAh/3.7V battery, theoretical battery life 18 hours, maximum charging current 2A
● Output capacity: 5V/1A, support for Android, Apple mobile phone
● Number of calibration points: 101
● Number of scanning points: 101
● Display Tracking: 4, Marking: 4, Setting Save: 5
● Scanning time: about 1.9s/1 times (50kHz ~ 1000MHz full frequency band)
Can measure S parameters, voltage standing wave ratio SWR, phase map, group delay, Smith chart...
Original 19.0Wh (about 5000mAh/3.7V after conversion) large capacity lithium battery
Designing a metal shield for the RF front end, allowing the S21 to have a dynamic range better than 60dB over the full frequency range.
Power Bank function 5V/1A, support for Android, Apple mobile phone
Open Coaxial cable length measure:
1, NanoVNA-F S11 parameters, SWR standing wave ratio measure:
WOUXUN UV9D-Plus antenna UHF standing wave ratio measurement, starting frequency: 300M, stop frequency: 600M, the green curve in the figure below is the standing wave ratio, the lowest frequency of the standing wave is at 444.000000MHz, SWR=1.03.
WOUXUN
UV9D-Plus antenna interface is an SMA standard male (internal screw) that can be directly connected to the instrument or connected via the included SMA elbow for easy testing.
Baofeng UV-5R VHF antenna VSWR measurement, the antenna interface is SMA standard female, can be connected to the instrument through the attached SMA-JJ adapter. The lowest point of the standing wave is 134.200000MHz, SWR=1.68.
2, S21 insertion loss measurement, low pass, high pass, band pass filter measurement
Measuring 6.5M Ceramic Notch with NanoVNA-F
Measuring 10.7M ceramic filter using NanoVNA-F
A self-made low-pass filter was measured using the NanoVNA-F with a 3dB bandwidth of approximately 400MHz.
3, performance indicators comparison,
Keysight E5071C four-port vVector network analyzer vs NanoVNA-F
R433 Surface-Acoustic-Wave Resonator Measurement Comparison,
Right click to open the original picture.
The actual frequency response curve in the
Surface-Acoustic-Wave Resonator
data sheet:
The real measurement result of NanoVNA-F, the blue curve is S21, and the transmission measurement (insertion loss).
LoRa
U Band duplexer
measure comparison
, RX: 480M TX: 505M Keysight E5071C four-port network
LoRa U Band duplexer measure comparison
, RX: 480M TX: 505M NanoVNA-F
S11 U Band duplexer data comparison, E5071C(501 points) vs NanoVNA-F(1
01 points
), import to Matlab.
NanoVNA-F 's
Data is interpolated.
S21 U Band duplexer data comparison,
E5071C(501 points) vs NanoVNA-F(1
01 points
)
, import to Matlab.
NanoVNA-F 's
Data is interpolated.
It can be seen that after calibration, NanoVNA-F can get good measurement results.
4、Package list
● NanoVNA-F x1
● SMA-JJ RG316 cable 20CM x2 (
NanoVNA-F is a standard SMA female connector, external screw inner hole, use this cable to switch to M head, N head to better protect SMA female
)
● 1 set of calibration parts (
50Ω standard load x1, sma open x1, sma short x1, use the included calibration piece, the instrument can be calibrated to get good measurement result data, the instrument has been fully frequency-calibrated before shipment and Store the data in parameter 0. If you change the measurement conditions, such as adding a patch cord and modifying the frequency range, you may need to recalibrate and store the parameters in 0-4. All parameters can be called up by the “recall” function.
)
● SMA-JJ double needle x1
● SMA elbow, external screw inner hole to inner screw inner needle x1
● Type-C data cable x1
● NanoVNA-F Quick Start Guide x1(English)
At the same time, To
Protect your device
a set of packing boxes with EPE protection equipment and parts is included.
Display test of LCD screen under sunlight.
5. About PC control software
After Firmware v0.0.3, NanoVNA-F support PC control softwares build for NanoVNA.
NanoVNASharp v1.0.3(by Hugen)
nanoVNA_mod_v2(by alex_m)
nanovna-saver(by Rune B. Broberg)
​
Right click to open the original picture.
For more info,
visit
https://github.com/flyoob/NanoVNA-F
6. NanoVNA-F Menu Structure Quick start guide
Right click to open the original picture.
Package list;
Nanovna meter  x1
● SMA-JJ RG316 cable 20CM x2 (NanoVNA-F is a standard SMA female connector, which is used to switch to M head and N head to better protect SMA female)
● 1 set of calibration parts (50Ω standard load x1, open circuit calibration piece x1, short circuit calibration piece x1, use the included calibration piece, the instrument can be calibrated to get good measurement result data)
● SMA-JJ double needle x1
● SMA elbow external screw inner hole to inner screw inner needle x1
● Type-C data cable x1
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
Item Location
Payment Mathord
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
About Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.