PH Meter and TDS Meter Combo-PPM Digital Water Quality Tester-for Drinking Water

Description

PH Meter Tester Features:
Material: ABS plastic
Color: yellow，Blue
Power supply: 2 * 1.5V LR44 Batteries
Range: 0.0 - 14.0pH
Resolution: 0.01pH
Accuracy: ± 0.01pH
Working temperature: 0 – 60 ℃
Size:155*29*16mm
Display: LCD Digital
Calibration: automatic calibration
ATC automatic temperature compensation
How to Use:
Step 1.Remove protective cap.
Step 2.First rinse the electrode with distilled water and suck it with filter paper.
Step 3.Turn the meter on by pressing “ON/OFF” key.
Step 4.Immerse the pH meter electrode in the solution to be tested (should not be over the immersion line).
Step 5.Stir gently and wait around 30 seconds till the reading stabilizes.
Step 6.After finish, clear the electrode with pure water, turn the meter off by pressing “ON/OFF” key.
Step 7.Always replace the protective cap after use.
TDS Meter, EC Meter & Temperature Meter
:
Features:
Automatic Temperature Compensation(ATC)
Equipped with backlit LCD for easy reading. If TDS≤40, the backlit color is green, If TDS>40, the backlit color is red.
Auto-Lock Function: From test beginning, the reading can be stabilized in seconds, and locked automatically for easy read and record.
Hold Function: Before reading locked automatically, the reading can be locked manually if press “HOLD”.
Factory Calibrated: No need calibration by user.
Auto-Off in 2 Minutes to conserve battery.
A colorful TDS chart on the back to explains ppm readings.
Includes a protective carrying case with belt clip, easy to carry.
Specifications:
Measuring Range:
TDS: 0 - 9990 ppm (parts per million)
Conductivity: 0 - 9990 µs/cm
Degrees Celsius: 0.1 - 50.0°C
Fahrenheit: 32.0 - 122.0°F
Accuracy: ± 2% F.S
Net Weight:1.62oz(46g)
Size:6.29 x 1.14 x 0.59 inches (160x29x15mm)
Note:
1.Clean the electrode with distilled water every time before and after use.
2. Be careful with the glass probe since it may be a little fragile when you use.
3. Open the battery case or replace battery, then need to recalibrate the meter.
4. Don not drop the entire TDS meter in the water or dip beyond the maximum immersion level.
5. Remember to gently wipe it with a clean, soft cloth when you're done before capping it again.
What is in package?
Option-PH & TDS Meter Combo
1 X PH Pen (batteries*2 included)
3 X PH Buffer Powder Packs (4.01pH, 6.86 pH and 9.18pH)
1 X Carrying Case
Option-
PH Meter
*1 x PH meter
*3 x PH Calibration Powders
*1 x Transparent box
*2 x 1.5V LR44 batteries
*1 x User manual in English
Option-
TDS Meter
1 X  water quality tester (with battery)
1 X User manual
ips
Option-
80x pH Test Strips
1Packs of 80 ph Indicator Strips with Color Chart