PortaPack + HackRF One SDR + Metal Case +TXCO + Havoc Firmware Programmed

Description

Welcome to my shop
Product Overview
2019 PortaPack + HackRF One SDR + Metal Case +TXCO + Havoc Firmware Programmed
Detail
2019 Latest PORTAPACK + HackRF One SDR Software Defined Radio + Metal Case +TXCO
The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options.
You  can fully unleash the power of the Portapack as this comes with
Havoc Firmware
Installed!
Package list:
Portapack x1
(
Havoc Firmware  Preinstalled
)
HackRF one x1
Antenna
Usb cable
The case headset hole is for iphone  headset or  same size headset
According to source code: github.com/sharebrained/portapack-hackrf
Redesign this hardware and share it to the enthusiast.
Progress of work:
1. has completed the program validation prototype.
2. the latest 2017.5 month documents are based on improvements.
Capture and Replay
One of the best things about the PortaPack is that it makes capture and  replay of wireless signals like those from ISM band remote controls extremely  easy. To create a capture you just need to enter the "Capture" menu,  set the frequency of the remote key, press the red 'R' Record button and then  press the key on the remote. Then stop the recording to save it to the SD Card.
Now you can go into the Replay menu, select the file that you just  recorded and hit play. The exact same signal will be transmitted over the air,  effectively replacing your remote key.
Microphone TX
Using the 3.5mm audio jack the Portapack can also be used as a standard  Push to Talk or voice activated walkie talkie radio. With a microphone plugged  into the audio jack simply hold down the right button to push to talk. If  required you can also enable multiple CTCSS tone options, as well as tones that  look like they enable transmission to wireless headphones
Other Transmitters
There are generic OOK  transmitter which can be programmed with custom data. This mode might be useful  for experimenting with simple keyfobs, or things like home automatation  switches.There are numerous transmit modes implemented that are questionable in  most countries and could get you into huge trouble. These transmitters are  purely to be used for internal testing with a faraday cage!
Receivers
By connecting speakers to the  Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM  audio signals.
ADS-B reception can be easily  enabled on the PortaPack by selecting the inductor and lightning symbol on the  top right. With the bias tee enabled youcan receive aircraft.
Hardware configuration:
1.TFT240*320 screen (model: ER-TFT024-3)
2. navigation switch (TSWB3NCB222)
3. audio output
4. microphone input
5.DC2.1 interface
6.4 layer gold plate
7.ROSH process (exported to Europe and America)
The latest version is updated with the latest documents in 2017.5 month
Add a PortaPack  to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack  attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot,
Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).
HAVOC FEATURES INCLUDE
IQ file replay
Microphone FM transmit with CTCSS
CTCSS decoder
Frequency manager (save & load from SD card, with categories and notes)
File manager
"Soundboard" wave file player (put 8-bit mono files in SD card /wav directory)
ADS-B receiver with map view
SSTV transmitter
Fully configurable transmit signals
POCSAG transmitter
POCSAG receiver/decoder
Morse transmitter (FM tone and CW)
OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)
RDS (Radio Data System) PSN, RadioText and Time groups transmitter
Meteorological radiosonde receiver for M10 and M2K2...
AFSK receiver
AFSK transmitter (Bell202...)
Nuoptix DTMF sync transmitter
TouchTunes jukebox universal remote
LCR (Language de Commande Routier) message generator
Street lighting control transmitter (CCIR tones)
"Play Dead" in case of emergency
Fully configurable RF signal generator
RSSI audio output as pitch (for direction finding)
SPECIFICATIONS
2.4 inch, 240 x 320 RGB LCD with resistive touch panel.
Four-way arrow keys, rotary jog wheel, and select button.
Coin battery for preserving settings and date/time.
Micro SD card slot for data and code storage
Some features demonstrated in 2016 February 22 firmware video:
SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall
.
Wideband (18MHz) spectrum analysis and waterfall.
Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
HackRF mode runs HackRF firmware for use with host computer SDR software.
PPM calibration for more accurate tuning.
Sleep mode saves power by turning off just the display.
You may also find the Furrtek HAVOC firmware very interesting!
Some assembly is required. .
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".
PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack  requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
Item Location
Payment Mathord
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
About Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.