-40%

Rig Expert AA30 Antenna Analyzer

$ 66

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Features: Back-Lit LCD Display
  • Mount Type: None
  • Condition: great condition, -barely used
  • Custom Bundle: No
  • Type: Antenna
  • Connectivity: UHF
  • Band: HF
  • MPN: AA-30
  • Brand: RigExpert
  • Country/Region of Manufacture: Ukraine
  • Compatible Brand: Universal

    Description

    RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.
    Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).
    Easy-to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith charts, etc.), make RigExpert AA-30 and AA-54 attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna.
    The following tasks are easily accomplished by using RigExpert AA-30 and AA-54:
    Rapid check-out of an antenna
    Tuning an antenna to resonance
    Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
    Making coaxial lines or measuring their parameters
    Cable testing and fault location
    Measuring capacitance or inductance of reactive loads
    Frequency range:
    AA-30: 0.1 to 30 MHz
    Frequency entry:
    1 kHz resolution
    SWR measurement range:
    1 to 10
    SWR measurement for 50 and 75-Ohm systems
    SWR display:
    numerical or easily-readable bar
    R and X range: 0…1000, -1000…1000 in numerical mode, 0…200, -200…200 in graph mode
    Display modes:
    – SWR at single or multiple (AA-54 only) frequencies
    – SWR, R, X, Z, L, C at single frequency
    – SWR graph, 100 points
    – R, X graph, 100 points
    RF output:
    – Connector type: UHF (SO-239)
    – Output signal shape: square, 0.1…10 MHz (AA-30) or 0.1…10.8 MHz (AA-54). For higher frequencies, third or fifth (AA-54) harmonics are used.
    – Output power: about +13 dBm (at 50 Ohm load)
    Power:
    – Two 1.5V, alkaline batteries, type AA
    – Two 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *
    – Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
    – When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
    Interface:
    – 128×64 graphical backlit LCD
    – 6×3 keys on the water-proof keypad
    – AA-54: multilingual menus and help screens, AA-30:menus and help screens in English language
    – USB connection to a personal computer
    Dimensions:
    22·10·3.6 cm (9·4·1.5”);
    Operating temperature:
    0…40 °C (32…104 °F)
    Weight (including batteries):
    400g (14 Oz)