YAESU FTDX10 FTDX1200 FT-950 10-PIN MINI-DIN Amplifier ALC cable ALL 10 PINS!

Description

First, let me set the record straight - 10 pin mini-din connectors ARE STILL BEING MADE! We contracted to get 1000 cables made!
These are GENUINE manufactured 10 pin mini-din connector cables (3 feet with stripped and tinned wires as shown).
These are not made by Yaesu but fit PERFECTLY in FTDX10, FT-450, FT-450D, FT-950, FTDX-1200
See the pics, look at the high quality of this cable and connector!
Create the output you want,
ALL 10 wires have been brought out
saving you hours of work to solder to those tiny pins on the connector!
Buy as many as you want, pay ONE flat USA shipping cost!
According to the Yaesu manual for these radios (see your radio manual).
Shown below for
FTDX10, FT-DX1200, FTDX-1200, FTDX1200, FT-450, FT-450D, FT-950 (CONFIRM pins/functions with your radio manual!)
PIN 1 BLACK - + 13.8 VDC out
PIN 2
BROWN
- TX GND (amplifier keying, we HIGHLY suggest using our RBI-1 Amplifier Buffer Interface, see
https://www.ebay.com/itm/140456018374
PIN 3
RED
- GND (ground)
PIN 4
ORANGE
- BAND DATA A
PIN 5
YELLOW
- BAND DATA B
PIN 6
GREEN
- BAND DATA C
PIN 7
BLUE
- BAND DATA D
PIN 8
PURPLE
- TX INHIBIT
PIN 9
GRAY
- ALC in (connect to your amplifier ALC jack)
PIN 10 WHITE - TX REQ IN
The FTM-100DR and FTM-400DR also use the same 10 pin jack but the FUNCTIONS are as described in the FTM-100DR and FTM-400DR manual. Use your manual to determine functions for any pins.
Need 10 or MORE cables? Send me a message for better pricing
ONLY FOR TEN OR MORE!
Want a less expensive amplifier keying cable that uses the 8 pin mini-din?
SEE OUR EBAY STORE under "CABLES" category.